ORCA – Core Series

TECHNICAL SPECIFICATIONS

Equipment Location

EcoPak

arcticspas Equipment Location Orca

Details

Outside Dimensions:

91’’ x 91’’ | 231 x 231 cm | 8′ x 8′

Height:

39’’ | 99 cm | 3′

Dry Weight:

1001 Lbs | 454 Kg

Wet Weight:

4339 Lbs | 1968 Kg

Water Capacity:

400 Gallons | 1514 Liters

Heater(Watts):

NA / Euro 4000 W

Electrical Requirements North America
(A = actual / B = breaker):

240 Volts / 6 Gauge Wire
2 Pumps / A40amp / B50amp

Dimensioned Drawings

ORCA Drawing

How to Build Deck Access For a Hot Tub

CORE SERIES

Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.

Your New Arctic Spa should be placed on a prepared and uniformly firm surface (Concrete pad, wood deck, patio blocks, gravel pad), not on bare ground.

If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs

Your Spa can weigh as much a 1000lbs (454kg)